• Shopping Cart

    Loading...

  • Product Categories

  • -- Mobile Phone 3G 4G Antennas

    -- Mobile Phone 3G 4G Antennas

    AM101 Magnetic Base mount to suit Laser 7dbi Mobile phone Antenna

    AM101 SO239 MAGNET BASE MOUNT KIT

    Magnetic attachment AM101 magnetic base mount which suits Laser antenna 731 for $139.99

    Additional DescriptionMore Details

    AM101 SO239 MAGNET BASE MOUNT KIT
    -Strong magnet , will stick to car while driving


    $35.00Price:
    Loading Updating cart...

    Australian Made 15.5dbi Peroidic Log GSM Mobile Phone Antenna for 3G 4G GSM

    High Quality Australian Made Mobile Phone / Data Antenna – ideal for both 3G and 4G Solutions

    Directional peroidic log antenna for GSM / 3G / 4G Networks

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    This is a high quality Australian Made GSM / mobile phone antenna. Out performs many other directional antennas of higher rated gain levels. This antenna is a peroidic log GSM antenna opposed to the tradational yagi style GSM antenna. The element spacing increases according to basic mathematics involving logarithms.

    Logarithms are related to musical tones and intervals. The same science is being more and more applied in the communications industry and in this case giving an increased signal strength over yagi antennas using older technology.

    It has the features of Very High Gain, weather proof, designed and built for use in the rugid and harsh Australian conditions.

    Features and benefits

    Broadband 824-1000 MHz and 1700-2170 MHz
    Gain : 14-15.5dBi
    Covers ALL Australian cellular-Mobile bands
    52 elements
    Full length 105 cm
    VSWR <2.5:1 front to Back Ratio (F/B Ratio) > 20dB (nominal)
    Output power handling: 10 W Input impedance
    50 Ohms (nominal)
    Polarization Vertical

    Includes 7 meters of quality Low Loss LMR 200 coaxial cable with copper inductor Gold/SILVER plated Fme connector Wing Nuts

    We can re-cable the antenna with LMR400 cable at an additional cost if you require a long cable run - in store on the spot.


    Price: $249.00
    $159.00Price:
    Loading Updating cart...

    Axis 9dbi Mobile Phone Antenna for NextG 3G - Australian Made

    Suit mobile phone and / or telstra data dongles and modems – Axis – high quality Australian made 9dbi omni directional whip antenna

    7dbi antennas is the best all round antenna if there is terrain
    9dbi Antennas will work further away but suits flat terrain

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    Axis - Australian made
    -1.3m


    Price: $249.00
    $149.00Price:
    Loading Updating cart...

    Axis Heavy Duty 7dbi 3G Mobile Phone Antenna

    Suit mobile phone and/or telstra data stick or modem – Axis one of the leaders in Australian made mobile phone antennas

    7dbi antennas will work better with terrain
    9dbi Antennas will work better on a flat land mass with direct line of sight

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    Axis - High Quality Mobile Phone Antenna - 7dbi is a very good all rounder antenna
    -73cm
    -Stainless steel spring
    -Comes with 5m cable with FME connection
    -Call us for a full range of patch cables to suit


    Price: $149.00
    $119.00Price:
    Loading Updating cart...

    Bull Bar Bracket Mount for mobile phone antenna

    Bull bar bracket mount to suit UHF or mobile phone antenna. Comes with two U bolts

    Additional DescriptionMore Details

    Bull bar bracket mount to suit UHF or mobile phone antenna. Comes with two U bolts


    Price: $20.00
    $15.00Price:
    Loading Updating cart...

    Cellink 5dbi Mobile Phone Antenna

    Suit mobile phone or data modem
    Low gain , but ideal for modems with no antenna

    Additional DescriptionMore Details

    Standard 5dbi with small magnetic base antenna - suits most common phone & modem patch leads.

    Open Spring type tuning coil
    Black anodized low wind noise whip
    High wind/speed magnetic base
    Rubber lined to protect duco’
    Excellent robust solution for non-permanent installations
    Pre-Crimped FME Female Plug 3M of super low-loss cable


    Price: $49.99
    $29.99Price:
    Loading Updating cart...

    Deutsche Technologies 15dbi 3G GSM Yagi Mobile Phone Antenna

    High Quality 3G Yagi GSM Mobile Phone / Data Antenna – ideal for 3G (800-900Mhz)

    Directional 3G Yagi mobile phone antenna

    This is for one 3G Yagi Mobile Antenna only and mounts vertically with standard attachment.

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    It has the features of Very High Gain, weather proof, designed and built for use in the rugid and harsh Australian conditions.

    Features and benefits

    Broadband 824-960 MHz
    Gain : 15dBi
    Covers ALL Australian cellular-3G Mobile bands
    Elements:34
    Full length 138 cm
    VSWR <2.5:1 front to Back Ratio (F/B Ratio) > 20dB (nominal)
    Dimensions : 1370 x 180 x 55mm
    Material:Aluminium
    Weight: 0.7kg
    50 Ohms (nominal)
    Polarization Vertical

    Includes 7 meters of quality Low Loss LMR 200 coaxial cable with copper inductor Gold/SILVER plated Fme connector Wing Nuts

    We can re-cable the antenna with LMR400 cable at an additional cost if you require a long cable run - in store on the spot.


    Price: $199.00
    $159.00Price:
    Loading Updating cart...

    Dual 4G MIMO Australian Made 18.5dbi Peroidic Log GSM Mobile Phone Antennas to suit 4G MIMO

    This is two high quality Australian Made 4G Mobile Phone Antennas for MIMO 4G. Package comes with 45 degree brackets. This is suitable for telstra, optus , vodafone and virgin.

    From our tests we were receiving over 80MBPS , that is almost 8mb/s over 10 times faster than normal ADSL through phone line.

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    This is a two high quality Australian Made GSM / mobile phone antennas setup for 4G LTE MIMO. Data speeds are phenomenal.

    These antenna will out perform many other directional antennas of higher rated gain levels. This antenna is a peroidic log GSM antenna opposed to the tradational yagi style GSM antenna. The element spacing increases according to basic mathematics involving logarithms.

    Logarithms are related to musical tones and intervals. The same science is being more and more applied in the communications industry and in this case giving an increased signal strength over yagi antennas using older technology.

    It has the features of Very High Gain, weather proof, designed and built for use in the rugid and harsh Australian conditions.

    Features and benefits

    Broadband 824-1000 MHz and 1700-2170 MHz
    Gain : 18.5dBi (+/- 1dbi)
    Covers ALL Australian cellular-Mobile bands
    52 elements per antenna
    Full length 1.05 m
    VSWR <2.5:1 front to Back Ratio (F/B Ratio) > 20dB (nominal)
    Output power handling: 10 W Input impedance
    50 Ohms (nominal)
    Polarization: 45 degree Vertical

    Includes 7 meters of quality Low Los LMR 200 coaxial cable with copper inductor Gold/SILVER plated Fme connector Wing Nuts

    We have LMR400 in store and can re-cable the antenna with LMR400 in store on the spot at an additional charge


    Price: $399.00
    $299.00Price:
    Loading Updating cart...

    FME Patch lead - CAL2560 to Suit most telstra phones but call to check please

    Suit Alcatel OT320 , MOT T190/T191 , SAM N171 / 181 , Sharp GX17 , LG TD6100 , Telstra F850 ZTE / ZTE F252 CAL2560 2560

    Does Most Telstra Mobile Phones

    Please call with your exact model so we can provide the right cable, or bring your phone/stick into the store

    Additional DescriptionMore Details

    Does Most Telstra Mobile Phones


    $25.00Price:
    Loading Updating cart...

    Laser 7dbi Gain Antenna with optional magnetic attachment

    The LASER CODE 731 is a slim line high gain collinear style antenna suitable for both the 850Mhz and 900Mhz frequencies. This antenna uses our patented LASER REACT system to provide a low VSWR. An allen key is also supplied for element replacement.

    Suits magnetic attachment AM101 magnetic base mount which is $35

    Additional DescriptionMore Details

    -No tuning necessary
    -Slim line collinear element
    -Detachable antenna from mount
    -Only 890mm long
    -Complete with right angle base on approx 4.5mm low loss double shielded coax with FME


    Price: $169.00
    $139.99Price:
    Loading Updating cart...

    Marine Grade NextG 3G 4G Mobile Phone Whip Antenna

    Marine Grade Mobile Phone antenna to suit a boat or caravan. Comes in white. Has mounting attachment with easy adjustment for fold up/down when required.

    For coverage map please see

    http://www.accessantennas.com.au/mobile-phone-coverage/

    Additional DescriptionMore Details

    -86cm in height
    -Comes with high quality mounting kit to suit any boat
    -Marine grade mobile phone antenna for boat
    -Australian Made

    Operates on both 3G and 4G

    Has 7.5dbi on 3G , 2.5 dbi on 4G


    Price: $199.00
    $189.00Price:
    Loading Updating cart...

    Mirror Mount Bracket

    Aluminium Mirror Mount to suit Mobile Phone Antenna or UHF Antenna , the backplate can be rotated 90 degrees so it can be attached to a TV antenna pole instead.

    Additional DescriptionMore Details

    Aluminium Mirror Mount to suit Mobile Phone Antenna or UHF Antenna , the backplate can be rotated 90 degrees so it can be attached to a TV antenna pole instead.


    Price: $20.00
    $15.00Price:
    Loading Updating cart...

    Refurbished Smoothtalker Iphone5/5S Cradle

    This is refurbished – in new condition – does not come with box, $40 off.

    When the best in mobile coverage is required choose a Smoothtalker cradle, the only iphone cradle on the market tested to work exceptionally well in weak signal areas.

    Craftsmanship and attention to detail have made these superior cradles amazing in coverage performance. These cradles are made in engineered and made in Toronto, Canada. Each cradle’s internal engineering has ensured maximum signal return for each handset. These cradles are specifically engineered so that the receiver in the cradle matches the antenna position on each handset.

    THIS DOES NOT COME WITH CIG CHARGER – Ask if you require a 12 Volt charger to charge the phone

    Additional DescriptionMore Details

    This holder has an external antenna connector with a FME end.

    Designed and engineering for the iPhone 5 / 5S


    Price: $159.00
    $99.00Price:
    Loading Updating cart...

    RFI 6.5dbi Mobile Phone Antenna CD2195

    Suit mobile phone or telstra USB wireless stick – Next G – 3G

    6-7.5dbi antennas will work better with terrain all around
    9dbi Antennas will work better on a flat land mass with direct line of sight

    Additional DescriptionMore Details

    The RFI Antenna offers multi-band performance for voice and data requirements. A high gain and consistent performer across 3G, GSM, PCS, 3G2100 and NextG bands.

    With a 13mm stud mount, these antennas may be installed on a fender mount or bullbar.

    Ideal for 2100MHz and 3G networks
    6.5dBi gain across 824-960 MHz Min.
    3dBi gain at 3G/2100MHz
    Black in colour
    86cm in length
    Includes 5m Coax Cable
    Weighs ~1.4kg


    Price: $199.00
    $139.00Price:
    Loading Updating cart...

    RFI 7.5dbi Mobile Phone Antenna CD2197

    Suit mobile phone or modem

    Additional DescriptionMore Details

    The RFI CD2197 Mobile phone Antenna offers multi-band performance for voice and data requirements.

    With a 13mm stud mount, these antennas may be installed on a fender mount or bullbar.

    Ideal for 2100MHz and 3G networks
    7.5dBi gain across 824-960 MHz Min.
    3dBi gain at 3G/2100MHz
    Black in colour
    86cm in length
    Includes 5m Coax Cable
    Weighs ~1.4kg


    Price: $249.00
    $169.00Price:
    Loading Updating cart...

    Smoothtalker Iphone Cradle to suit iPhone 4 and 4S

    When the best in mobile coverage is required choose a Smoothtalker cradle, basically the only iphone cradle on the market which works in weak signal areas.

    Craftsmanship and attention to detail have made these superior cradles amazing in coverage performance. These cradles are made in engineered and made in Toronto, Canada. Each cradle’s internal engineering has ensured maximum signal return for each handset. These cradles are specifically engineered so that the receiver in the cradle matches the antenna position on each handset.

    Additional DescriptionMore Details

    This holder has an external antenna connector with a FME end.

    Compatible with the iPhone 4 & 4S


    Price: $159.00
    $139.00Price:
    Loading Updating cart...

    Smoothtalker Iphone Cradle to suit iPhone 5

    When the best in mobile coverage is required choose a Smoothtalker cradle, basically the only iphone cradle on the market which works in weak signal areas.

    Craftsmanship and attention to detail have made these superior cradles amazing in coverage performance. These cradles are made in engineered and made in Toronto, Canada. Each cradle’s internal engineering has ensured maximum signal return for each handset. These cradles are specifically engineered so that the receiver in the cradle matches the antenna position on each handset.

    Additional DescriptionMore Details

    This holder has an external antenna connector with a FME end.

    Designed and engineering for the iPhone 5


    Price: $159.00
    $139.00Price:
    Loading Updating cart...

    Smoothtalker Universal Cradle to suit any phone - Galaxy , HTC , Sony or any other phone

    When the best in mobile coverage is required choose a Smoothtalker cradle, basically the only cradle on the market which works in weak signal areas.

    Craftsmanship and attention to detail have made these superior cradles amazing in coverage performance. These cradles are made in engineered and made in Toronto, Canada. Each cradle’s internal engineering has ensured maximum signal return.

    Suction mount in photo is optional – $15

    Additional DescriptionMore Details

    This holder has an external antenna connector with a FME end.

    Compatible with literally any phone


    $69.00Price:
    Loading Updating cart...

    Universal Windscreen suction mount for Smoothtalker Iphone Cradles

    Universal Windscreen suction mount to suit the full range of Smoothtalker phone cradles

    Additional DescriptionMore Details

    Windscreen suction mount to suit the Smoothtalker phone cradles


    Price: $25.00
    $22.50Price:
    Loading Updating cart...
    Pages: « First « Previous 1 2 Next » Last »
    

    Site designed by Organic Optimisation and HJ McDonald